hobby – Lair of the Lagomorph

If you’re at all associated with the Warhammer side of our miniature hobby, you probably came across the sad news that John Blanche passed away earlier in the month. Needless to say he had an incredible impact on our hobby, his artwork inspiring many of us and laying the course for much of what Warhammer and its dark future counterpart became. It’s easy to see his impact by the number of excellent posts on the topic around the internet (I’m partial to Azazel’s post on the subject, which focuses on the impact of John’s miniature painting articles). For myself, one of my first proper experience of the hobby was reading through the 3rd edition Warhammer 40,000 rulebook, and soon after getting Mordheim and playing that for quite a few years. If you’re familiar with both those books, you’ll understand that John’s art provided a lot of the context as I got to grips with these worlds, and therefore has stayed with me throughout the years as I paint models and play games. On the news of his death I spent a bit of time looking back at those books, taking in at the art that inspired me all those years ago, and deciding that I should channel this energy into some model painting! Luckily for me I picked up the Canoness Veridyan model when that was released quite a while ago (I saw 2016 somewhere), and that being a direct interpretation of one off John’s most famous paintings that seemed like a good way to go.

I initially decided maybe I should try to paint this to display standard, as it’s been many years since I tried my hand at that, but ended up going with the flow and that resulted in a model that’s more like character standard (i.e. slightly better than army painting!). I think I’m just too impatient to paint display models these days, or at least not used to it anymore!

I left the model as is, adding a few elements on the base to recall the original painting (i.e. adding a stack of bones, and a white rat scurrying away).

If you’re unfamiliar with the painting, here’s a photo of a nice print of it I have hanging near my games table.

I really enjoyed painting the model, it was nice to take a bit more time than usual on a single figure. I find painting reds and blacks quite satisfying, and I have to say I had a bit of an urge to do some more Sisters of Battle/Adepta Sororitas models after this one, so who knows maybe that’ll start something!

I’ve been working on a cyberpunk version of Masse d’Armes as I’m a fan of cyberpunk media and been wanting to play some miniatures games in the genre. There was a slight problem with that, which is that I don’t really have suitable models and terrain! The closest I do have is the terrain and models I made for This is not a Test, which is firmly in the post apocalyptic genre so not really appropriate. I therefore decided to start at the beginning and make a game board.

Rather than get a game mat, I decided to make my own, starting with a 900x400mm (~3x2ft) MDF board from the local hardware shop. I then cut out the shapes for the raised footpath areas using 5mm foam core panels.

I glued these down with PVA glue and left them overnight weighted down.

To cover up the exposed foam on the sides of the foamcore panels I cut 5mm strips of thick paper and glued them to the exposed edges.

I used a ballpoint pen and a straight edge to mark some lines in the foam core to represent separate sections for the footpath. I tried to keep the pressure hard enough to mark the surface but not too hard so as not to tear through the outer layer of card.

I 3d printed some manhole covers (https://www.thingiverse.com/thing:3246148 – shrunk to 20mm diameter) to add some details to the road sections. I glued these down using PVA.

I had a little bit of Citadel Roughcoat left in an old can so I sprayed some in patches, concentrating on the road sections, but making sure to dust all areas. I then undercoated the whole board with some grey undercoat, painted the road sections over with a mix of black and blue paint, aiming for that asphalt colour.

For the lines on the roads I used a Sharpie paint pen (Creative Marker I think is the name). I used some foam core offcuts to act as a spacer, pushing them against the raised edge. This worked really well and I’ll do this again if I have to paint road lines again in the future.

I then got into weathering all this. No photos from this stage I’m afraid, was having too much fun to remember to take photos! I used quite a few washes of diluted acrylic paint, as well as some drybrushing and stippling paint using a torn sponge. Finally I broke out the airbrush and sprayed on some patches of browns and greys.

I also used the airbrush masked with a piece of paper to spray a mostly clean line along the paved area to separate it from the rest of the non-road sections.

Finally I sprayed a few splatter effects with the old trick of loading up your brush with some paint/wash and using the air from the airbrush to flick it everywhere.

*A few splatters. You can also see the effect of masking off the footpath area in this photo.*

The manhole covers were just painted with a burnt umber and drybrushed with a gunmetal. These really should be level with the road surface, but I wasn’t keen enough to cut a recess for these to sit in.

I really enjoyed putting this together, and now need some terrain to go on top! Luckily enough I have some 3D printed buildings ready to go (ready for painting at any rate!) so should be able to get started on these.

This is likely my last post before Christmas, so for those of you that celebrate it I hope you have a lovely time (and lots of miniatures under the tree)!